Welcome
Free Information Package
Our Current Products
How to Order
What's New?
Everything You Need to Know Before You Buy
Frequently Asked Questions
(FAQ's)
Testimonials
Dear SOTA
Our
Sales Policy
Search our Website
Downloads/Brochures
How to Reach Us
Trouble-Shooting Guides
Ionic Colloidal Silver Generator
Generate Ionic Colloidal Silver using .9999 purity Silver Wires
MODEL #: CSG5
Constant-Current and Constant-Voltage output for making the highest quality Ionic/Colloidal Silver.
|
DISCONTINUED |
Disclaimer Description International Voltage Requirements Warranty
Cost
Ordering
Other Products What's New? Frequently
Asked Questions (FAQ's)
Everything
You Need to Know Before You Buy Options for Powering the Silver Maker
|
Disclaimer:
These units have not been evaluated by Health Canada or the FDA for
safety or effectiveness. Government regulators say that testimonials
are misleading and deceptive. Also, please understand that these
products are not intended to nor are they allowed to cure or treat
any specific disease. Government regulators state you must consult a
medical doctor for the treatment of all diseases. NOTE: On November 29, 2000 we received this e-mail message from Health Canada regarding our Silver Maker unit "...please be informed that the Silver Maker does not meet the definition of a "device" as defined in the Food and Drugs Act. R.S., c. F-27, s. 1. The Silver Maker is therefore not subject to the regulatory requirements of the Canadian Medical Devices Regulations." |
New Model CSG5 features include:
Quartz crystal Micro-Computer controlled functions for accurate timing sequences.
The Silver Maker is an electronic unit which generates top quality Ionic-Colloidal Silver. This is achieved by using only the highest grade .9999 Pure Fine Silver Electrodes. Our Assay Certificate for Silver Wires is on file, and can be viewed by clicking HERE. Our Certificate of Compliance for Silver Wire Purity is on file, and can be viewed by clicking HERE.
Each Silver Maker is a professionally designed quality unit, thoroughly tested and guaranteed to operate per specifications.
The Silver Maker generates the finest quality Ionic-Colloidal Silver at a rate of 5-8 PPM (part per million) in 2 hours for 16 ounces of distilled water, with an Ionic-Colloid silver particle size that is mostly ionic, with colloidal particles in the range of 0.005 - 0.015 microns (Verified on a Scanning Electron Microscope).
To see independent lab tested results of our Ionic-Colloidal Silver as an anti-bacterial solution please click HERE. Or, to purchase your own testing equipment contact Hanna Instruments.
Unique Features:
A unique circuit design allows The Silver Maker to operate from a single 9 Volt alkaline battery. Our state-of-the-art electronic design utilizes a proprietary DC-DC converter which boosts the output of the 9 Volt battery to the 31 Volts DC required by The Silver Maker.
Constant-Current Output: Output is 1.5mA +/- 0.5mA
Constant-Voltage Output: Unique circuitry maintains the required 31 Volts output regardless of battery voltage or other input power (like from an AC-DC Wall Adaptor, Automobile Battery, or Solar Panel). Thus, as the battery runs down or if the input voltage fluctuates, the output will remain at 31 Volts. No other unit using either 3 x 9 Volt batteries or voltage triplers can offer this very important feature.
We use only the purest, Fine Silver Wire Electrodes, 4 Nine Grade (.9999 pure) for the Ionic-Colloid Silver production. Our Certificate of Compliance for Silver Wire Purity is on file, and can be viewed by clicking HERE.
Our Electrical Circuit Boards are GOLD Plated for extreme reliability and workmanship.
3 Year Parts and Labor Warranty on all internally mounted components. Replacement Fine Silver Wire Electrodes and other probes are available.
The Unit:
 |
The Silver Maker is housed in a custom plastic
enclosure, with a built-in compartment for the 9V battery. A slide-off lid
allows you to change the battery easily. A series of Green LED lights indicates the
elapsed time the unit is on. Minutes ON are shown at 30, 60, 90 and 120
minutes (2 hours). The Silver Maker will turn off silver production at the end of 2
hours (120 minutes). An Orange LED Light is used to indicate
the Ionic-Colloidal Silver production is underway and an electrical circuit
has been established. A Red LED Light indicates Low Battery.
The Silver Maker has two jacks, one for plugging in the Fine Silver Wires
and another for hooking up an AC-DC Wall Adaptor or other external power source, so you don't have to go through
batteries. The Silver Wire cord is about 4 feet long and is very flexible.
The Silver Maker is packaged in a soft carrying case for easy storage.
Electronics:
The Silver Maker is designed to the highest standards. We have improved on the design with added features.
Our electronic design is unique and efficient making
the unit very portable and light-weight. There's even a provision for adding an external power source, such as
an AC-DC Wall Adaptor, which you can purchase from any electronics store.
Specifications:
The Fine Silver Wires are 14 AWG
(1.63 mm or 0.064" dia.) x 8" long (20 cm) and are constructed of only Pure Fine (.9999 pure)
Silver Wire.
Weight of The Silver Maker unit is only a few ounces - very lightweight.
Each Silver Maker comes complete with:
 |
 |
The Silver Maker unit
The Silver Maker ships with an International Wall Adaptor intended for any voltage from 110VAC 60 Hz (North America) to 220/240 Volt AC 50 Hz Mains (as found in International Countries). Thus, you can use your new Silver Maker virtually anywhere in the world.
Additionally, the Silver Maker may also be operated directly from an external 12 Volt DC Battery like an automobile cigarette lighter. You will need to purchase an Adapter cord which plugs into the cigarette lighter and has a Centre Positive, 2.1mm Plug. Radio Shack® usually has these Adapters.
In the event of a power outage here are some options for powering the Silver Maker other than with its 9-Volt DC Alkaline Battery:
| The Silver Maker has a full 3 Year Parts and Labor Warranty on all internally mounted components. New Silver Wires can be ordered through us. |
|
DISCONTINUED May we suggest the Silver Pulser instead? Please contact us for Shipping Charges, Rates, and Options Please NOTE: Any duties, taxes, import fees and licenses are the responsibility of the receiver. (We Accept: Visa, MasterCard, or Money Order) NOTE: If paying by Money Order, and you reside outside of Canada, please ensure you send an INTERNATIONAL MONEY ORDER. Wholesale inquiries welcome. Please call 1.800.224.0242 or 1.250.770.2023 for details. |
|
Our Policy at SOTA: We encourage you to educate yourself before using any of our units. It's easy to make a decision in desperation rather than based on information. We are a company that believes in self-responsibility for ourselves and our customers. RETURN POLICY: 1) If the unit has not been used at all, you can return it for a full refund (less Shipping Charges) within 30 days. 2) If the unit has been used but unit and case are in new condition, you can return within 30 days with a 20% restocking charge (plus Shipping Charges). With the Magnetic Pulser (MPG) and Water Ozonator (WOZ), the restocking charge will be 10% (plus Shipping Charges). 3) Return postage and insurance are your responsibility. NOTE:
All repairs and returns require an
RMA#. For detailed
instructions and an RMA#
on returning for repair or refund, please contact: Thank you for your understanding. |
| Please note: If you are ordering by Fax, E-Mail, or Mailing us a Money Order please remember to include the following important and necessary information so we can process your order without delays (especially International Orders):
|
(Visa, MasterCard, or Money Order)
|
For inquiries and orders write to:
NOTE: This is NOT a secure page. Please DO NOT e-mail your credit card numbers or other sensitive data. Thank-you! |
Please click HERE for
SOTA's current Products...
Please click HERE for our What's New? page...
Please click HERE for our
Frequently Asked Questions (FAQ's)...
Please click
HERE for
information on what you should know before you buy...
Call toll free in North America
1.800.224.0242
Fax: 1.250.770.1999
