---

Welcome Free Information Package Our Current Products How to Order What's New?
Everything You Need to Know Before You Buy Frequently Asked Questions (FAQ's)
Testimonials Dear SOTA Our Sales Policy Search our Website
Downloads/Brochures How to Reach Us
Trouble-Shooting Guides

---

The Silver Pulser

Bio-Stimulator (Plant Growth Stimulator) and

Ionic Colloidal Silver Generator

MODEL #: SP5

"First Aid Kit of the Future"

Disclaimer Description International Voltage  Requirements
Options for Powering the Silver Pulser Warranty Cost
Ordering Other Products What's New? Frequently Asked Questions (FAQ's)
Everything You Need to Know Before You Buy
Trouble-Shooting Guides

Disclaimer:

Disclaimer: Please understand the SOTA Products are not intended to cure or treat any specific disease. The products have not been evaluated by any Government for safety or effectiveness. Government regulators consider testimonials to be misleading and deceptive and recommend you consult a medical doctor for the treatment of all diseases. Results using the SOTA Products will vary for each person.

What is "The Silver Pulser"?

New Model SP5 features include:

• New streamlined unit.
• Built-in Constant-Current Circuit for the Ionic/Colloidal Silver Output.
• Yellow LED Light indicates when the current through the stimulator electrodes is correct and functioning.
• Special DIN style jack to comply with new government regulations.
• Soft carrying case

Each Silver Pulser is a professionally designed quality unit, thoroughly tested on an oscilloscope, and is guaranteed to operate per the specifications. (Click HERE to see the original Bio-Protocol schematic or HERE for the improved schematic. NOTE: Our Silver Pulser has a more advanced and proprietary circuit than what is shown here.)

The Silver Pulser is a dual function unit 1) Bio-Stimulator and 2) Ionic/Colloidal Silver Generator with Constant-Current.

The Silver Pulser uses only the highest quality .9999 Pure Fine Silver Electrodes. Our Assay Certificate for Silver Wires is on file, and can be viewed by clicking HERE. Our Certificate of Compliance for Silver Wire Purity is on file, and can be viewed by clicking HERE.

The Silver Pulser generates the finest quality Ionic Colloidal Silver at a rate of 5-8 ppm (part per million) in 2 Hours for 16 ounces of distilled water, with an Ionic Colloid silver particle size that is mostly ions, with colloidal particles in the range of 0.005 - 0.015 microns (Verified on a Scanning Electron Microscope). The SP5 Model has a built-in Constant-Current Circuit for the ultimate in Ionic/Colloidal Silver Production.

To see independent lab tested results of our Ionic Colloidal Silver as an anti-bacterial solution please click HERE.

The Silver Pulser has a Bi-Phasic output frequency of ~3.92 Hertz (cycles per second) at a nominal voltage of 31 VOLTS DC peak per cycle.

• The Bio-Electric Protocol has changed. SOTA boosted the output voltage from 27 Volts to 31 Volts (from 54 Volts Peak-Peak, to 62 Volts Peak-Peak). A new intensity control was specified to help widen the band of the output control to avoid "bunching" the signal near the high end of the control knob.

• A unique circuit design allows The Silver Pulser to operate from a single 9 Volt alkaline battery. Original plans actually called for the use of 7 batteries in the design. Our state-of-the-art electronic design utilizes a proprietary DC-DC converter which boosts the output of the 9 Volt battery to the 31 Volts DC required by The Silver Pulser.

• Constant-Voltage Output - Unique circuitry maintains the required 31 Volts output regardless of battery voltage or other input power (like from an AC-DC Wall Adaptor, Automobile Battery, or Solar Panel). Thus, as the battery runs down or if the input voltage fluctuates, the output will maintain the 31 Volts. No other unit using either 3 x 9 Volt batteries or voltage triplers can offer this very important feature.

• We use only the purest, Fine Silver Wire Electrodes, 4 Nine Grade (.9999 pure) for the Ionic-Colloid Silver production.

• Constant-Current Output - SP5 Model has built-in Constant-Current Circuit for Ionic/Colloidal Silver production.

• Output monitoring circuit and indicator.

• The Bio-Stimulator Probes are of the highest quality.

• Our Electrical Circuit Boards are GOLD Plated for extreme reliability and workmanship.

• All electrical wire connections made with Food Grade solders and fluxes for the highest in safety and purity.

• 3 Year Parts and Labour Warranty on all internally mounted components. Replacement Fine Silver Wire Electrodes and Probes are available.

The Unit:

The Silver Pulser is housed in an attractive new custom plastic enclosure with a built-in compartment for the 9 Volt battery. A slide-off lid allows you to change the battery easily. A Thumbwheel Switch Control Knob turns The Silver Pulser on and off and varies the intensity of the "Bio-Stimulator Probe" output.

A Green LED Light comes on when the Silver Pulser is turned on.

A flashing Yellow LED light on the unit indicates there is a correct Bio-Stimulator output and comes on only when current is flowing.

An Orange LED light is used for the Ionic-Colloidal Silver generation. The Orange LED Light comes on only when current through Silver Wires is correct and the circuit is complete.

A Red LED Light indicates low battery.

The Silver Pulser has one 6 pin DIN style jack for plugging in the Fine Silver Wires and for the Bio-Stimulator Probes. A second jack is used for hooking up an AC-DC Wall Adaptor so you don't have to go through batteries. NOTE: You cannot power the unit with a Wall Adaptor at the same time as using the Bio-Stimulator output. This is a government regulatory stipulation. However, a Wall Adaptor can be used for Silver production only.

We include Cotton Sleeves to put over the Bio-Stimulator Probes for helping to maintain a good connection when moistened. (Hint: Use a Salt Water solution or a conductive gel for better conductivity!)

The Silver Pulser is packaged in a custom soft carrying case for easy storage.

Electronics:

The Silver Pulser is designed to the highest standards. We have improved on the design with added features. Our electronic design is unique and efficient making the unit very portable and light-weight. There's even a provision for adding an external power source to save on batteries when making Ionic/Colloidal Silver, such as an AC-DC Wall Adaptor which you can purchase from any electronic store.

Specifications:

• Battery Voltage: 9 Volts DC (Alkaline Battery)
• Optional Input Voltage: 6 - 12 Volts DC @500mA Wall Transformer/Adapter, Automobile Battery, or Solar Panel.
• Output Voltage at Colloidal Silver Wires: 31 Volts DC, (+/- 1 Volt) Constant-Voltage Output
• Output Current at Colloidal Silver Wires: 1.5 milliamps (+/- 0.5ma) Constant-Current Output
• Ionic-Colloid Silver Production: 5 - 8ppm (parts per million) for 2 hours for 16 ounces distilled water.
• Ionic-Colloid Silver Particle Size: Mostly ionic, with colloidal particles in the range of 0.005 - 0.015 microns when made as directed.
• Ionic-Colloid Silver Colour: Clear or Pale Gold.
• Silver Wire Life: Can make many gallons ionic/colloidal silver per set of Fine Silver Wires, when made as directed.
• Output Voltage at Stimulator Probes: 31 Volts (Peak per Cycle, 62 Volts Peak-Peak) Bi-Phasic at ~3.92 Hertz (cycles per second) +/- 1 Hz. To see the actual output waveform from the oscilloscope, please click HERE. Note the extremely square and symmetrical waveform; free of any spikes or artifacts.
• Output Current at Stimulator Probes: ~12 milliamps maximum when probes shorted and Control Knob on full intensity. 

The Fine Silver Wires are 14 AWG (1.63mm or 0.064" dia.) x 8" long (20 cm) and are constructed of only Pure Fine (.9999 pure) Silver Wire.

Bio-Stimulator Probes are 1/8" diameter x 1.25" long (3mm diameter x 3.8 cm long).
Weight of The Silver Pulser unit is only a few ounces - very lightweight.

Each Silver Pulser comes complete with:

• The Silver Pulser unit

• Operating Instructions
• Two (2) .9999 (4 Nine Grade) Pure Fine Silver Wire Electrodes
• One (1) Silver Wire Holder
• One (1) High Grade Plated Bio-Stimulator Probes
• One (1) Velcro®/Neoprene® Strap
• One (1) Velcro® Arm Strap
• One (1) Scotchbrite® scrubber pad
• One (1) 2 oz. Dark Glass Dropper Bottle
• Six (6) Cotton Probe Sleeves
• One (1) 9 Volt Alkaline Battery
• One (1) Soft Carrying Case
• CE Certification
• RoHS Compliant
• 3 Year Parts and Labour Warranty on internally mounted components

International Voltage (220 or 240 Volt Mains) Requirements:

The Silver Pulser can be operated by an external power source like an AC-DC Wall Adaptor, Automobile Battery, or Solar Panel. If you wish to power the Silver Pulser with a wall transformer, your options are:

1. Purchase SOTA's International & Universal Wall Adaptor. Please see our Products page for details.

2. Purchase a local Wall Adaptor with: Input 220VAC or 240VAC, 50 Hz Mains, 6-12 Volt DC output, 500mA (milli-amps) or more, Centre Positive, 2.1mm Plug.

3. Additionally, the Silver Pulser may also be operated directly from a 12 Volt DC Battery like an automobile cigarette lighter. You will need to purchase an Adapter cord which plugs into the cigarette lighter and has a Centre Positive, 2.1mm Plug. Radio Shack® usually has these Adapters.

Options for Powering the Silver Pulser

In the event of a power outage here are some options for powering the Silver Pulser other than normally with its 9-Volt DC Alkaline Battery:

1. The Silver Pulser may be operated directly from a 12 Volt DC Battery like from an automobile cigarette lighter. You will need to purchase an Adapter cord which plugs into the cigarette lighter and has a Centre Positive, 2.1mm Plug, like from Radio Shack®.
2. The Silver Pulser can be powered by a suitable Solar Panel. Keep in mind that most solar panel generators are used to re-charge a battery which in turn operates the unit. Therefore we suggest you use a solar panel to re-charge a 12 Volt DC automobile battery (preferably a sealed Gel-Cel® type), then run the Silver Pulser directly from the battery. You will need to use a cord which has alligator clips on one end to attach to the battery terminals, and the appropriate Centre Positive, 2.1mm Plug on the other end to plug into the Silver Pulser. Be careful with polarity! Centre-Positive! This type of cord with alligator clips on one end is probably not readily available, therefore you will need to buy a cord and cut off the end that normally goes into the cigarette lighter, and solder your own set of alligator clips. Use a black and red alligator clips so you ensure polarity is correct each time you connect the circuit.
3. If you wish to operate the Silver Pulser directly from a solar panel you will need to use a 12 Volt DC rated output panel that is capable of supplying at least 1 Amp of current. The Silver Pulser's initial starting demands may require a higher output solar panel. That is why it is preferable to use a charged 12 Volt DC battery instead.

What about a Warranty?

The Silver Pulser has a full 3 Year Parts and Labour Warranty on all internally mounted components. New Silver Wires, and/or Stimulator Probes can be ordered through us.

How much is "The Silver Pulser"?

$225.00 US Please contact us for Shipping Charges, Rates, and Options Please NOTE: Any duties, taxes, import fees and licenses are the responsibility of the receiver. (We Accept: Visa, MasterCard or Money Order) NOTE: If paying by Money Order, and you reside outside of Canada, please ensure you send an INTERNATIONAL MONEY ORDER. Wholesale inquiries welcome. Please call 1.800.224.0242 or 1.250.770.2023 for details.

How can I order "The Silver Pulser"?:

Our Policy at SOTA: We encourage you to educate yourself before using any of our units. It's easy to make a decision in desperation rather than based on information. We are a company that believes in self-responsibility for ourselves and our customers. RETURN POLICY: 1) If the unit has not been used at all, you can return it for a full refund (less Shipping Charges) within 30 days. 2) If the unit has been used but unit and case are in new condition, you can return within 30 days with a 20% restocking charge (plus Shipping Charges). With the Magnetic Pulser (MPG) and Water Ozonator (WOZ), the restocking charge will be 10% (plus Shipping Charges). 3) Return postage and insurance are your responsibility. NOTE: All repairs and returns require an RMA#. For detailed instructions and an RMA# on returning for repair or refund, please contact: repairs@sotainstruments.com Tel: 1.250.770.2023 Fax 1.250.770.1999 Thank you for your understanding.

Here are your options:

1. For a credit card purchase, call us toll free anywhere in the United States or Canada at 1.800.224.0242 or call 1.250.770.2023 or fax us at 1.250.770.1999.
2. To pay by money order send with an Order Form (Click HERE to download Order Form) to our address. (See below).
3. Company Policy states that personal cheques will be held for 6 weeks to allow funds to clear.
4. If you want to order by e-mail, our site is not secure so please keep this in mind. info@sotainstruments.com

Please note: If you are ordering by Fax, E-Mail, or Mailing us a Money Order please remember to include the following important and necessary information so we can process your order without delays (especially International Orders): Your Full name and street address. (Remember, couriers will not deliver to PO Boxes.) Telephone Number and, if available FAX Number. (Couriers must have a Telephone number, or they cannot deliver. And we need a way of contacting you should there be a shipping problem.) Your E-Mail address if applicable (especially International Orders), so we can contact you easily should there be a shipping problem.

 

(Visa, MasterCard, or Money Order)

Call toll free in North America 1.800.224.0242 Or: Tel: 1.250.770.2023 Fax: 1.250.770.1999 Business Hours: Monday-Friday 8:00AM - 4:00PM Pacific Standard (West Coast) Time. For inquiries and orders write to: SOTA Instruments Inc. PO Box 20019, Penticton, BC Canada V2A 8K3   Or e-mail to info@sotainstruments.com NOTE: This is NOT a secure page. Please DO NOT e-mail your credit card numbers or other sensitive data. Thank-you!

Other Products:

Please click HERE for SOTA's current Products...

What's New?

Please click HERE for our What's New? page...

Frequently Asked Questions (FAQ's):

Please click HERE for our Frequently Asked Questions (FAQ's)...

Everything you need to know before you buy...

Please click HERE for information on what you should know before you buy...

SOTA's Home Page Top of Page