
Bio-Stimulator (Plant Growth Stimulator) and
Ionic Colloidal Silver Generator
MODEL #: SPL1
|
Please note that all purchases from Canada and countries other than the US are now processed in Canadian funds.
If the US dollar continues to slide in value our pricing will need to increase. Over the last seven years we have seen the US dollar drop in value by over 50%. We can maintain our pricing as long as the US dollar stays near par with the Canadian dollar.
Please note that all purchases of SOTA
products are subject to the laws of British Columbia, Canada. Please understand the SOTA Products are not intended to cure or treat any specific disease. The products have not been evaluated by any Government for safety or effectiveness. Government regulators consider testimonials to be misleading and deceptive and recommend you consult a medical doctor for the treatment of all diseases. Results using the SOTA Products will vary for each person. The SOTA Team |
Disclaimer
Description
International Voltage Requirements
Options for Powering the Silver Pulser
Warranty
Cost
![]()
Ordering
Other Products
What's New?
Frequently Asked Questions (FAQ's) ![]()
Everything
You Need to Know Before You Buy ![]()
| Disclaimer: Please understand the SOTA Products are not intended to cure or treat any specific disease. The products have not been evaluated by any Government for safety or effectiveness. Government regulators consider testimonials to be misleading and deceptive and recommend you consult a medical doctor for the treatment of all diseases. Results using the SOTA Products will vary for each person. |
We are very excited to offer a "lite" version of our best-seller: The Silver Pulser
Our new SP Lite is specifically designed for high reliability and an un-heard-of LOW price. It is simply a low cost version of the Silver Pulser. At this low price, anyone around the globe can afford this remarkable technology. Special volume pricing for use in developing countries. Please call for details (1.800.224.0242).
Now, all of humankind can benefit from micro-currents of electricity.
What makes the SP Lite different from the Silver Pulser? Simply put, the SP Lite cannot be repaired as it is a fully sealed unit. Because of this, the warranty is only available for 6 months. After this time, if the SP Lite requires repairs it must be discarded and a new one purchased. On the other hand, the Silver Pulser has more refined features, more accessories and of course has a full 3 year warranty.
If price is a concern and you want to forego a full warranty and the ability to make repairs to the unit, consider the SP Lite. If you want a full-featured unit then the Silver Pulser is the product for you.
New SP Lite Model#: SPL1 features include:
Each SP Lite is a professionally designed quality unit, thoroughly tested on an oscilloscope, and is guaranteed to operate per the specifications.
The SP Lite is a dual function unit 1) Bio-Stimulator and 2) Ionic/Colloidal Silver Generator with Constant-Current.
The SP Lite uses only the highest quality .9999 Pure Fine Silver Electrodes. Our Assay Certificate for Silver Wires is on file, and can be viewed by clicking HERE. Our Certificate of Compliance for Silver Wire Purity is on file, and can be viewed by clicking HERE.
The SP Lite generates the finest quality Ionic Colloidal Silver at a rate of 5-8 PPM (part per million) in 2 Hours for 16 ounces of distilled water, with an Ionic Colloid silver particle size that is mostly ions, with colloidal particles in the range of 0.005 - 0.015 microns (Verified on a Scanning Electron Microscope). The unit has a built-in Constant-Current Circuit for the ultimate in Ionic/Colloidal Silver Production.
To see independent lab tested
results of our Ionic Colloidal Silver as an anti-bacterial solution please click HERE.
The SP Lite has a Bi-Phasic output frequency of ~3.92 Hertz (cycles per second) at a nominal voltage of 31
VOLTS DC peak per cycle.
| Feature |
SP Lite |
|
| Warranty |
6 months |
3 years |
| Able to repair unit? | No | Yes |
| Constant-Voltage Output on Bio-Stimulator? | Yes | Yes |
| Constant-Current Output for Colloidal Silver Production? | Yes | Yes |
| Single 9 Volt Alkaline Battery Operation | Yes | Yes |
| Silver Wire Holder? |
No (Alligator Clips are used)
NOTE: A Silver Wire Holder can be purchased as an option. |
Yes |
| Length of .9999 Pure Fine Silver Wires | 4 Inches | 8 Inches |
| Glass Dropper Bottle? | No | Yes |
| Arm Strap Holder? | No | Yes |
| Cotton Sleeves | 2 Pair | 3 Pair |
| Velcro / Neoprene Wrist Straps | 1 | 1 |
| Able to power with optional AC/DC Adaptor? | Yes | Yes |
| Low Battery Warning Light? | No | Yes |
| Soft Carrying Case? | No | Yes |
| Able to return used unit? | No | Yes |
| Price | $115 US | $225 US |
Unique Features:
The Bio-Electric Protocol has changed. SOTA boosted the output voltage from 27 Volts to 31 Volts (from 54 Volts Peak-Peak, to 62 Volts Peak-Peak). A new intensity control was specified to help widen the band of the output control to avoid "bunching" the signal near the high end of the control knob.
A unique circuit design allows The SP Lite to operate from a single 9 Volt alkaline battery. Our state-of-the-art electronic design utilizes a proprietary DC-DC converter which boosts the output of the 9 Volt battery to the 31 Volts DC required by The SP Lite.
Constant-Voltage Output - Unique circuitry maintains the required 31 Volts output regardless of battery voltage or other input power (like from an AC-DC Wall Adaptor, Automobile Battery, or Solar Panel). Thus, as the battery runs down or if the input voltage fluctuates, the output will maintain the 31 Volts. No other unit using either 3 x 9 Volt batteries or voltage triplers can offer this very important feature.
We use only the purest, Fine Silver Wire Electrodes, 4 Nine Grade (.9999 pure) for the Ionic-Colloid Silver production.
Constant-Current Output - SP Lite has built-in Constant-Current Circuit for Ionic/Colloidal Silver production.
Output monitoring circuit and indicator.
The Bio-Stimulator Probes are of the highest quality copper.
6 Month Limited Parts and Labor Warranty on all internally mounted components. Replacement Fine Silver Wire Electrodes and Probes are available.
The Unit:
![]() |
The SP Lite is housed in sealed custom plastic enclosure with an external slot for the 9 Volt battery. A Thumbwheel Switch Control Knob turns The SP Lite on and off and varies the intensity of the "Bio-Stimulator Probe" output.
A Green LED Light comes on when the SP Lite is turned on.
A Flashing Green LED light on the unit indicates there is a correct Bio-Stimulator output and comes on only when current is flowing.
An Orange LED light is used for the Ionic-Colloidal Silver generation. The Orange LED Light comes on only when current through Silver Wires is correct and the circuit is complete.
There is no low battery warning light.
The SP Lite has one 6 pin DIN style jack for plugging in the Fine Silver Wires
and for the
copper Bio-Stimulator Probes. A second jack is used for hooking up an AC-DC Wall Adaptor so you don't have to go through batteries.
NOTE: You cannot power the unit with a wall
Adaptor at the same time as using the Bio-Stimulator output. This is a
government regulatory stipulation. However, a wall Adaptor can be used for
Silver production only.
We include Cotton Sleeves to put over the Bio-Stimulator Probes for helping to maintain a good connection when moistened. (Hint: Use a Salt Water solution or a conductive gel for better conductivity!)
Electronics:
The SP Lite is designed to the highest standards. Our electronic design is unique and efficient making
the unit very portable and light-weight. There's even a provision for adding an external power source to save on
batteries when making Ionic/Colloidal Silver, such as an AC-DC Wall Adaptor which you can purchase from any electronic store.
Specifications:
The Fine Silver Wires are 14 AWG (1.63mm or 0.064" dia.) x 4" long (1.5 mm diameter x 10 cm long) and are constructed of only Pure Fine (.9999 pure) Silver Wire.
Bio-Stimulator Probes
are 1/8" diameter x 1.25" long (3mm diameter x 3.8 cm long) and are
constructed of heavy copper.
Weight of The SP Lite unit is only a few ounces - very
lightweight.
Each SP Lite comes complete with:
![]() |
The SP Lite unit
The SP Lite can be operated by an external power source like an AC-DC Wall Adaptor, Automobile Battery, or Solar Panel. If you wish to power the SP Lite with a wall transformer, your options are:
Purchase SOTA's International & Universal Wall Adaptor. Please see our Products page for details.
Purchase a local Wall Adaptor with: Input 220VAC or 240VAC, 50 Hz Mains, 6-12 Volt DC output, 500mA (milli-amps) or more, Centre Positive, 2.1mm Plug.
Additionally, the SP Lite may also be operated directly from a 12 Volt DC Battery like an automobile cigarette lighter. You will need to purchase an Adaptor cord which plugs into the cigarette lighter and has a Centre Positive, 2.1mm Plug. Radio Shack® usually has these Adaptors.
In the event of a power outage here are some options for powering the SP Lite other than normally with its 9-Volt DC Alkaline Battery:
| The SP Lite has a limited 6 Month Parts and Labor Warranty on all internally mounted components. NOTE: The SP Lite cannot be repaired as it is a sealed unit!! New Silver Wires, and/or Stimulator Probes can be ordered through us. |
|
Please contact us for Shipping Charges, Rates, and Options Please NOTE: Any duties, taxes, import fees and licenses are the responsibility of the receiver. (We Accept: Visa, MasterCard or Money Order) NOTE: If paying by Money Order, and you reside outside of Canada, please ensure you send an INTERNATIONAL MONEY ORDER. Wholesale inquiries welcome. Please call 1.800.224.0242 or 1.250.770.2023 for details. |
| Our Policy at SOTA: We encourage you to educate yourself before using any of our units. It's easy to make a decision in desperation rather than based on information. We are a company that believes in self-responsibility for ourselves and our customers. RETURN POLICY: 1) If the SP Lite unit has not been used at all, you can return it for a full refund (less Shipping Charges) within 30 days. 2) If the SP Lite has been used (even once) you will not be able to return it. So once the SP Lite unit is used it is yours. NOTE:
All repairs and returns require an
RMA#. For detailed
instructions and an RMA#
on returning for repair or refund, please contact: Thank you for your understanding. |
| Please note: If you are ordering by Fax, E-Mail, or Mailing us a Money Order please remember to include the following important and necessary information so we can process your order without delays (especially International Orders):
|
(Visa, MasterCard, or Money Order)
|
For inquiries and orders write to:
NOTE: This is NOT a secure page. Please DO NOT e-mail your credit card numbers or other sensitive data. Thank-you! |
Please click HERE for
SOTA's current Products...
Please click HERE for our What's New? page...
Please click HERE for our
Frequently Asked Questions (FAQ's)...
Please click
HERE for
information on what you should know before you buy...